Thermoplastic level gauges made of transparent polyamide with good mechanical resistance are compatible with mineral oil, gasoline, lubricant, petroleum, solvents and most chemical agents; Avoid contact with alcohol-based solutions and high-temperature antifreeze. For these types of applications, use our model\/CX, which is made of special resin resistant to fluids containing alcohol and antifreeze.
\nExternal plastic protection made of PA66 30% fiberglass.
\nThe internal body of the level gauges consists of two transparent parts assembled and then sealed using an ultrasonic welding process, to ensure a leak-free seal around the body. Inside the transparent body there is a graduated white sticker made of ”Vinile Cast” to improve the view of the level.
\nM12 zinc plated bolts and flanged nuts are standard (optional AISI 303 stainless steel bolts and nuts available, 70 durometer Buna flat gasket; maximum recommended tightening torque = 5 Nm (3.7 lb-ft).
\nMounting can be done externally by providing 2 M12 threaded holes at 127mm (tolerance \u00b1 0.2mm); alternatively, they can be secured internally through 2 smooth holes \u00d8 12.5 mm (-0.2) using the flange nuts.
\nMaximum working temperature 80\u00b0C (176\u00b0F).
\nMaximum working pressure 1 bar (14.7 PSI), (if used in pressurized tanks, contact us).
\nThe REED switch sensor is connected to the internal transparent tube, adjustable in height according to the level control requirements; sensor is supplied with power cable (length 30 cm \/ 0.98 ft) and M8 male connector; On request, it is possible to provide a separate connection cable (length 250 cm \/ 8.2 ft) complete with M8 female connector.
\nFloating element made of technopolymer containing a magnetic element that closes the electrical contact when it reaches the ”REED” level switch sensor.
\nMaximum temperature electrical sensor (calibrated at 60\u00b0C-70\u00b0C \/ 140-158\u00b0F) incorporated in the galvanized M12 bolt (IP65 protection degree) with DIN rotary connector.
\nStandard executions: XL127-PLAST-SL-ST-NO (electrical contact normally open on the temperature sensor) XL127-PLAST-SL-ST-NC (electrical contact normally closed on temperature sensor).
\nOperation characteristics: the vertical level indicator XL127- PLAST-SL-ST, in addition to allowing a visual inspection, provides an electrical signal when the required temperature of the fluid inside the tank is reached (under normal use conditions). ambient temperature of approximately 20\u00b0C\/68\u00b0F, and also provides an electrical signal when the floating element reaches the preset minimum level.
\nXL127-PLAST-SL-ST-NO: the level sensor closes the electrical circuit when the preset minimum level is reached; The maximum temperature sensor closes the electrical circuit at the preset threshold temperature.
\nXL127-PLAST-SL-ST-NC: the level sensor closes the electrical circuit when it reaches the minimum preset level; The maximum temperature sensor opens the circuit at the preset threshold temperature.<\/p>\n","protected":false},"excerpt":{"rendered":"
Thermoplastic level gauges made of transparent polyamide with good mechanical resistance are compatible with mineral oil, gasoline, lubricant, petroleum, solvents and most chemical agents; Avoid contact with alcohol-based solutions and high-temperature antifreeze. For these types of applications, use our model\/CX, which is made of special resin resistant to fluids containing alcohol and antifreeze. External plastic…<\/p>\n","protected":false},"featured_media":78057,"template":"","meta":{"_monsterinsights_skip_tracking":false},"product_brand":[],"product_cat":[554],"product_tag":[],"class_list":["post-78412","product","type-product","status-publish","has-post-thumbnail","product_cat-accessories-for-hydraulic-systems","description-off","first","instock","product-type-simple"],"acf":[],"yoast_head":"\n