OPERATING AND STANDARD ELEMENTS

Vertical level indicators with external aluminum protector; standard center to center distance 300-400-500 mm; Consult our commercial / technical office for custom lengths.
Polyamide PA66 end caps, black colour, transparent polycarbonate tube; Behind the tube is a graduated contrast screen for an accurate view of the liquid level.
The XLV-T model is equipped with a probe thermometer graduated from 0°-120°C (30-250F).
Aluminum shield can be rotated 90 degrees when needed for side view.
M12 zinc plated bolts and nuts (available on request in stainless steel); Buna flat gasket on Shore 70 durometer.
Mounting of the level gauge can be done externally by providing 2 M12 threaded holes at a center distance of 254mm, tolerance ±0.5mm. Alternatively, they can be secured internally through two Ø 12.5mm (-0.2) plain holes using the supplied flange nuts. Suggested maximum tightening torque 5 Nm.
Maximum working temperature 90°C (194 F), maximum suggested pressure 1 bar (14.5 PSI). For use in pressure tanks, contact our technical office.
Suggested for application with mineral oils, hydraulic fluids, diesel and fluids containing glycols. Limited resistence to unleaded fuel and diesel. Avoid contact with alcohol based solutions and antifreeze fluids at high temperature.(ask our technical department for resistance to other chemical agents).
Data Sheet (PDF)